6mm SteelGrating Twisted Bars

\

Twisted cross bar grating panel load-bearing component of the steel grating, typically made of twisted square steel (such as 5×5mm, 6×6mm) or flat steel, and fixed to the load-bearing flat steel through pressure welding or pressure locking processes. Its key parameters include:

Diameter/Specification: The size of the cross bar , depending on the load requirements.

Material: Mostly Q235B carbon steel or 304 stainless steel, with the surface treated by hot-dip galvanizing for rust prevention.

During installation, attention should be paid to the welding firmness between twisted cross bar and the flat steel to ensure the overall structural stability.

Twisted Cross bar is a common industrial material primarily used for manufacturing structures such as steel grating, platforms, and walkways, featuring high strength and corrosion resistance.

Product specifications and parameters: Dimensions: Common cross-twisted strip widths include 6mm, 7mm, 8mm, 10mm, etc. Specific dimensions can be customized according to requirements.

Surface treatment: including untreated (black), hot-dip galvanizing, powder coating, etc., to enhance corrosion resistance.

Application: Widely used in platforms, walkways, stair treads, guardrails.

Steel grating twisted square steel, square section twisted steel bars welded to load-bearing flat steel to fix the flat steel. Twisted square steel and flat steel are welded together as a whole.